All stamped fittings are manufactured from extra deep drawing steel (EDDS) in accordance with ASTM–A653. This type of steel is manufactured by domestic steel mills and has some unique qualities. Stamped fittings are precision drawn, tolerances must be within + or - .002 thickness to assure a quality product at all times. All pressed fittings are made of 24 Ga. or 22 Ga. Galvanized material with a G60 or better coating thickness and is chemically treated to retard white rust.

90° Saddle Tap W/Damper

Dimensions to be listed as follows: A on B

Also available with 2” Insulation Extension

All Fittings are 1.75” from Bead to End of Fitting.