> Damper and Louvers Product Pages
When Time is Everything… We Manufacture in Days – Not Weeks!
Dampers • Access Doors • Louvers
Specializing In Products For the HVAC Industry
All Products
- 45 Degree Adjustable Angles
- 45 Degree Adjustable Elbows and Angles
- 45 Degree Elbow – 3 pieces
- 45 Degree Full Saddle
- 45 Degree Full Saddle
- 45 Degree Lateral Cross
- 45 Degree Lateral Cross with E-Z Flange
- 45 Degree Lateral Cross with Reducer
- 45 Degree Register Saddle
- 45 Degree Standing Seam Angles
- 45 Degree Standing Seam Elbows and Angles
- 45 Degree Swedged Saddle
- 45 Degree Swedged Saddle
- 45 Degree Two-Piece Pressed Solid Welded Angles
- 45 Degree Welded Gored Angles
- 45° Degree Adjustable Angles with E-Z Flange
- 45° Degree Lateral Cross with E-Z Flange
- 45° Degree Lateral Tee with E-Z Flange
- 45° Degree Swedge Saddle with E-Z Flange
- 45° Full Saddle with E-Z Flange
- 45° Standing Seam Elbows and Angles with E-Z Flange
- 45° Two Piece Pressed Solid Welded Elbows with E-Z Flange
- 45° Welded Gored Elbows and Angle with E-Z Flange
- 60 Degree Elbow – 4 pieces
- 90 Degree Adjustable Elbows
- 90 Degree Adjustable Elbows and Angles
- 90 Degree Adjustable Elbows with E-Z Flange
- 90 Degree Conical Cross
- 90 Degree Conical Cross with E-Z Flange
- 90 Degree Conical Cross with Reducer
- 90 Degree Conical Swedge Saddle
- 90 Degree Conical Tee
- 90 Degree Conical Tee with E-Z Flange
- 90 Degree Conical Tee with Reducer
- 90 Degree Cross
- 90 Degree Cross with E-Z Flange
- 90 Degree Cross with Reducer
- 90 Degree Elbow – 2 pieces
- 90 Degree Elbow – 5 pieces
- 90 Degree Full Saddle
- 90 Degree Full Saddle
- 90 Degree Full Saddle with EZ-Flange
- 90 Degree Increased Tap
- 90 Degree Increased Tap
- 90 Degree Pressed Saddle Tap
- 90 Degree Pressed Saddle Tap with Damper
- 90 Degree Pressed Saddles No Damper with E-Z Flange
- 90 Degree Pressed Saddles with 2-Inch Stand Off with E-Z Flange
- 90 Degree Pressed Saddles with Volume Damper with E-Z Flange
- 90 Degree Register Saddle
- 90 Degree Shoe Tap Saddle
- 90 Degree Shoe Tap Saddle with E-Z Flange
- 90 Degree Standing Seam Elbows
- 90 Degree Standing Seam Elbows and Angles
- 90 Degree Standing Seam Elbows and Angles with E-Z Flange
- 90 Degree Straight Tap
- 90 Degree Swedge Saddle with E-Z Flange
- 90 Degree Swedged Saddle
- 90 Degree Swedged Saddle
- 90 Degree Tee
- 90 Degree Tee No Damper with E-Z Flange
- 90 Degree Tee Polyvinyl Coated
- 90 Degree Tee with E-Z Flange
- 90 Degree Tee with Reducer
- 90 Degree Tee with Volume Damper
- 90 Degree Two Piece Pressed Solid Welded Elbows
- 90 Degree Two Piece Pressed Solid Welded Elbows with E-Z Flange
- 90 Degree Welded Gored Elbows
- 90 Degree Welded Gored Elbows and Angles with E-Z Flange
- 90° Degree Conical Swedge Saddle with E-Z Flange
- 90° Pressed Saddles with 1-1/2-inch Stand Off with E-Z Flange
- Access Doors
- Access Doors – Rectangular Ductwork
- Access Doors – Round Spiral Ductwork
- Access Doors (Rectangular)
- Access Doors (Round)
- ATCO – R4.2 Insulated Flexible Duct
- BDD – Back Draft Damper
- Bull Head Tee
- Bullhead Tee
- Bullhead Tee
- Bullnose Tee (Bullhead)
- Butyl Tape
- Canvas Connector
- Chip Brush 2-Inch
- Close Cell Neoprene
- Clutcher Hanging Systems
- Companion Angle Rings – Pressed and Rolled
- Companion Rings
- Complete Seal Damper Sleeve
- Complete Seal Damper Sleeve with 2-inch Standoff
- Complete Seal Fittings
- Concentric Reducer
- Concentric Reducer
- Concentric Reducer Polyvinyl Coated
- Concentric Reducer with E-Z Flange
- Concentric Transition
- Concentric Transition
- Condu Locks
- Condu-Clamp
- Condu-Lock
- Conical Cross
- Conical E-Z Tap with 2-inch Standoff Collar
- Conical E-Z Tap with 2-inch Standoff with E-Z Flange
- Conical Lateral
- Connector (Coupling)
- Connector (Coupling)
- Cross
- Cross Polyvinyl Coated
- Cross with Reducer Polyvinyl Coated
- CSR – Curb Support Rail
- Diffusers
- Double Rod Hanger
- Double Rod Hanger
- Double Wall 45˚ Degree Angle with E-Z Flange and Barrel Clamp
- Double Wall 45° Lateral with E-Z Flange and Barrel Clamp
- Double Wall 90° Elbow with E-Z Flange and Barrel Clamp
- Double Wall 90° Tee with E-Z Flange and Barrel Clamp
- Double Wall E-Z Flange Jr. with Barrel Clamp – 6-inch to 24-inch
- Double Wall E-Z Flange with Barrel Clamp – 26 inch to 96 inch Diameter
- Double Wall Pipe with E-Z Flange and Barrel Clamp
- Double Wall Standard Spiral Pipe Connector
- DP 2590 Solvent Based Spray Adhesive
- DP 77 Industrial Spray Adhesive
- DP1010 Water Based Duct Sealant – Gray
- DP2501 Water Based Duct Liner Adhesive – Clear
- Duct Cap & Duct Wrap
- Ductcap – 14in – 38in
- Ductcap – 6in – 14in
- Ductwork Tools
- E-Z Flang Jr. with Barrel Clamp Field Cut Set
- E-Z Flange Jr. with Barrel Clamp – 6-inch to 24-inch Diameter
- E-Z Flange Jr. with Barrel Clamp – 26 to 96-inch Diameter
- E-Z Flange Jr. with Barrel Clamp – 6 to 24-inch Diameter
- E-Z Flange Spiral Pipe System Specs
- E-Z Flange with Barrel Clamp
- E-Z Flange with Barrel Clamp – 26 to 96-inch Diameter
- E-Z Tap Collar Polyvinyl Coated
- E-Z Tap Collar with 2-inch Standoff
- E-Z Tap Collar with Damper
- E-Z Tap Collar with Damper Polyvinyl Coated
- E-Z Tap Collar with E-Z Flange
- E-Z Tap Collars
- E-Z Tap Collars with 2-inch Standoff
- E-Z Tap Collars with 2-inch Standoff with E-Z Flange
- E-Z Tap Collars with Volume Damper with E-Z Flange
- E-Z Tap Conical Takeoff Collar
- E-Z Tap Conical Takeoff Collar Polyvinyl Coated
- E-Z Tap Conical Takeoff Collar with Damper
- E-Z Tap Conical Takeoff Collar with Damper Polyvinyl Coated
- E-Z Tap Conical Takeoff Collar with E-Z Flange
- Eccentric Reducer
- Eccentric Reducer
- Eccentric Reducer Polyvinyl Coated
- Eccentric Reducer with E-Z Flange
- Egg Crate
- End Bearing Line – 1/2in Open End
- End Bearing Line – 3/8in Acorn Nut Handle
- End Bearing Line – 3/8in Closed End
- End Bearing Line – 3/8in Open End
- End Cap (Plug)
- End Cap (Plug)
- Engineering End Bearing Line – 1/2in Closed End
- Equal Y Branch
- EZ Rail and Acoustic Turning Vane
- EZ Rail and Hollow Turning Vane – 4in
- EZ Rail II Snap Lock and Single-Wall Turning Vanes
- Fitting Coupling
- Fitting End Cap
- Fixed Pattern Diffusers – 2 Cone
- Fixed Pattern Diffusers – 2 Cone Series
- Fixed Pattern Diffusers – 3 Cone
- Fixed Pattern Diffusers – 3 Cone Series
- Flanges
- Flat Oval Standard Spiral Pipe Connector
- Flex Connector with E-Z Flange
- Flexible Duct Connector – 3 x 3 x 3 – equal to MBX
- Flexible Duct Connector – 4 x 4 x 4 – TDC
- Flexible Duct Connector – Aluminum – 3 x 3 x 3
- Flexible Duct Connector – Jr. Canvas – 2 x 3 x 2
- Flexible Duct Connector – Stainless – 3 x 3 x 3
- Floor sweeps
- Full Blast Gate
- Full Blast Gates
- Galvanized R-Angle
- Gaskets
- Grille Box Tap
- Hammer-On Regulator Sets
- Handles, Extensions, Standoffs & Regulators
- Heavy Duty Flexible Duct Ties
- Heavy Duty Flexible Duct Ties
- Heavy Duty Volume Dampers
- Heavy Volume Dampers
- Hi-Efficiency Take off (Super Heto) with 2-inch Standoff with E-Z Flange
- Hi-Efficiency with Take Off (Super Heto) with Volume Damper with E-Z Flange
- High Efficiency Take Off (Super Heto) with 2-inch Extension and EZ Flange
- High Efficiency Take Off (Super Heto) with EZ Flange
- High Efficiency Takeoffs
- High Efficiency with 2-inch Standoff
- KV12 Bracket Assembly
- Lateral
- Lateral Cross
- Lateral Saddle Tap
- Light Gauge Dampers
- Light Gauge Round Pipe Hangers
- Light Gauge Round Pipe Hangers
- Mechanical System Hanger – Clutcher
- MVBD – Med-Velocity Back Draft Damper
- Notch Lock
- Notched Collars
- Notched Collars
- Notched Collars with Damper
- Nylon Ties
- OBN – Opposed Blade Non-Sealed Balancing Damper
- OBS – Opposed Blade Sealed Damper
- Offset
- Offset
- Offset
- Offset
- Offset with E-Z Flange
- Oval to Rectangular
- Oval to Round
- Pair of Pants (Wye Branch)
- Pair of Pants (Wye Branch) with E-Z Flange
- Pants 1
- Pants 1
- Pants 2
- Pants 2
- PBN – Parallel Blade Non-Sealed Balancing Damper
- PBS – Parallel Blade Sealed Damper
- Pipe Coupling
- Pipe End Cap
- Polyken 229 Duct Tape – Silver
- Polyken 330 Duct Tape – Aluminum
- Polyken 339 Printed Duct Tape – Aluminum
- Polyken 557 Printed Duct Tape – Silver
- Polyken 827 Duct Tape – White
- Pressed Concentric Reducer
- Pressed Concentric Reducer E-Z Flange
- Pressed End Caps with E-Z Flange
- R4.2 Insulated Flexible Duct
- Radius Angle
- Radius Angle
- Radius Elbow
- Radius Elbow – with square throat
- Radius Offset
- Radius Offset
- Radius with Square Throat
- RBD – Round Back Draft Damper
- RC – Roof Curb – Insulated
- Rectangular Duct Wrap
- Rectangular Duct Wrap
- Reducing Bullhead Tee
- Reducing Conical Lateral
- Reducing Conical Tee
- Reducing Cross
- Reducing Lateral
- Reducing Offset
- Reducing Offset
- Reducing Offset – Left or Right
- Reducing Radius Elbow – Left or Right
- Reducing Tee
- Reducing Y Branch
- Register Boot
- Register Takeoffs
- Register Takeoffs
- Regulators and Sets – 1/2in Quadrant
- Regulators and Sets – 3/8in Dial
- Regulators and Sets – 3/8in Quadrant
- ROBN – Round Opposed Blade Non-Sealed Balancing Damper
- ROBS – Round Opposed Blade Sealed Damper
- Round Ceiling Diffuser with Butterfly Damper
- Round Dampers (Light Gauge)
- Round Ductcap
- RSBN – Round Single Blade Non-Sealed
- RSBS – Round Single Blade Sealed Damper
- Saddle Tap
- Save on Labor with SMC Turning Vane and E-Z Rail
- Save Time & Money with E-Z Flange
- SBD – Single Blade Balancing Damper
- Sealant and Adhesives
- Sheet Metal Screws (TEK Screws)
- Single Rod Hangers
- Single Rod Hangers
- Skyblasts
- SLB – Standard Louver Box
- Sleeve with 2” Standoff
- SLF – Standard Louver Flange
- Special Fabrics Flexible Duct Connector
- Spin-In Collar with Dual Quad Damper
- Spiral Pipe
- Spiral Pipe Connector (Non-Gasketed)
- Square Throat Angle
- Square Throat Elbow
- Square Throat Elbow
- Square to Round
- Standard Spiral Pipe Connector
- Standoffs – Elevated Damper Regulator
- Straight 90 Degree Tap
- Straight Tee
- Struts, Couplings, Nuts and Washers
- Super Heto
- Super Heto with 2-inch Extension with E-Z Flange
- Super Heto with 2″ Standoff
- Super Heto with Damper
- TDC Accessories
- Tee with Reducer Polyvinyl Coated
- Tek & Zip Screws
- TEK Sheet Metal Screws – 10 x 1/2in
- TEK Sheet Metal Screws – 10 x 1in
- TEK Sheet Metal Screws – 10 x 3/4in
- Tensioning Tool
- Tensioning Tool
- The E-Z Flange Spiral Pipe System
- Tie Rod Reinforcement
- Top or Bottom Flat Transition
- Top or Bottom Flat Transition
- Transition – Top and Left Sides Flat
- Transition – Top and Left Sides Flat
- Transition – Top and Right Sides Flat
- Transition – Top and Right Sides Flat
- Wire Mesh (Bird Screen)
- Wire Rope 7×7
- Wire Rope Hangers CL18
- Wire Rope Hangers CL23
- Y Branch
- Y-Branch
- Zip Sheet Metal Screws – 10 x 1/2in
- Zip Sheet Metal Screws – 10 x 1in
see more products