All HVAC Accessories Products

• Access Doors
• Access Doors – Rectangular Ductwork
• Access Doors – Round Spiral Ductwork
• ATCO – R4.2 Insulated Flexible Duct
• Butyl Tape
• Canvas Duct Connector
• Chip Brush 2-Inch
• Close Cell Neoprene
• Clutcher Hanging Systems
• Companion Rings
• Condu Locks
• Condu-Clamp
• Condu-Lock
• Diffusers
• DP 2590 Solvent Based Spray Adhesive
• DP 77 Industrial Spray Adhesive
• DP1010 Water Based Duct Sealant – Gray
• DP2501 Water Based Duct Liner Adhesive – Clear
• Duct Cap & Duct Wrap
• Ductcap – 14in – 38in
• Ductcap – 6in – 14in
• Ductwork Tools
• Egg Crate
• End Bearing Line – 1/2in Open End
• End Bearing Line – 3/8in Acorn Nut Handle
• End Bearing Line – 3/8in Closed End
• End Bearing Line – 3/8in Open End
• Engineering End Bearing Line – 1/2in Closed End
• EZ Rail and Acoustic Turning Vane
• EZ Rail and Hollow Turning Vane – 4in
• EZ Rail II Snap Lock and Single-Wall Turning Vanes

• Fixed Pattern Diffusers – 2 Cone
• Fixed Pattern Diffusers – 3 Cone
• Flanges
• Flexible Duct Connector – 3 x 3 x 3 – equal to MBX
• Flexible Duct Connector – 4 x 4 x 4 – TDC
• Flexible Duct Connector – Aluminum – 3 x 3 x 3
• Flexible Duct Connector – Jr. Canvas – 2 x 3 x 2
• Flexible Duct Connector – Stainless – 3 x 3 x 3
• Full Blast Gates
• Galvanized R-Angle
• Gaskets
• Hammer-On Regulator Sets
• Handles, Extensions, Standoffs & Regulators
• Heavy Duty Flexible Duct Ties
• HVAC Slip and Drive Connection
• Mechanical System Hanger – Clutcher
• Notch Lock
• Nylon Ties
• Polyken 229 Duct Tape – Silver
• Polyken 330 Duct Tape – Aluminum
• Polyken 339 Printed Duct Tape – Aluminum
• Polyken 557 Printed Duct Tape – Silver
• Polyken 827 Duct Tape – White
• Regulators and Sets – 1/2in Quadrant
• Regulators and Sets – 3/8in Dial
• Regulators and Sets – 3/8in Quadrant
• Save on Labor with SMC Turning Vane and E-Z Rail
• Sealant and Adhesives
• Special Fabrics Flexible Duct Connector
• Standoffs – Elevated Damper Regulator
• Struts, Couplings, Nuts and Washers
• TDC Accessories
• TDC and TDF Connections
• Tek & Zip Screws
• TEK Sheet Metal Screws – 10 x 1/2in
• TEK Sheet Metal Screws – 10 x 1in
• TEK Sheet Metal Screws – 10 x 3/4in
• Tensioning Tool
• Tensioning Tool
• Tie Rod Reinforcement
• Wire Mesh (Bird Screen)
• Wire Rope 7×7
• Zip Sheet Metal Screws – 10 x 1/2in
• Zip Sheet Metal Screws – 10 x 1in