PriceDuct Products

REINFORCEMENT

1/2 in. Conduit Installed

1/2″ Diameter electric metallic tube with galvanized zinc coating is cut to length with star nuts are installed into each end and installed into your duct to provide added rigidity and strength against deflection.

GO TO SPECS

1/2 in. Conduit KD

1/2″ Diameter electric metallic tube with galvanized zinc coating is cut to length with star nuts are installed into each end and installed into your duct to provide added rigidity and strength against deflection.

GO TO SPECS

3/4 in. Conduit Installed

3/4″ Diameter electric metallic tube with galvanized zinc coating is cut to length with star nuts are installed into each end and installed into your duct to provide added rigidity and strength against deflection.

GO TO SPECS

SEAM SEALANTS

Coil Injected

Sealant spottily applied by the automatic sealer on the standard length duct coil line pieces. No cost is added as the sealant is not guaranteed to have adequate coverage to seal duct thoroughly.

GO TO SPECS

Duct Painted Sealer

Sealant is applied after the standard length coil line duct pieces are assembled. Sealant may be applied by caulk gun, brush, or spray.

GO TO SPECS

Fitting Painted Sealer

Sealant is applied after all fitting pieces are assembled and accessories are installed. Sealant may be applied by caulk gun, brush, or spray.

GO TO SPECS