All PVC fittings can be manufactured with:
• E-Z Flange Jr. with Barrel Clamp – 6” to 24” Diameter
• E-Z Flange with Barrel Clamp – 26” to 96” Diameter
• Standard Spiral Slip Connector
Spiral pipe and fitting slip connector joints must be sealed to prevent air leakage and to keep dirt and sand out of the duct system. PVC Tape is recommended as it is ideal for this usage. It has superior adhesive qualities, even in extremely hot or extremely cold weather. Also as an insurance factor, PVC Duct Sealer No. 8 is available. This is a flexible and self-curing air pressure sealant. This can be applied from one-gallon cans by brush application. It provides a positive sealing of joints and screw holes. PVC Duct Sealer No. 8 may also be obtained in a cartridge package. Approximate coverage is 375 linear feet per gallon at a 1/4” bead.
Standing Seam Elbows and Angles
Standing Seam fittings work well for applications and offer an alternative angles. These are available from 8″ through fabricated as heavy as 16 gauge. Other radiuses are available.
Full Sweep Standing Seam Elbows
8-30 will be a 5 gore one piece standard 32 and larger in diameter (1.5 x CL) elbows are fabricated using two 45 degree with an E-Z flange and barrel clamp.