Sheet Metal Connectors, Inc. manufactures rectangular fittings, including bullhead tee ducts, in most sizes and configurations. Bullhead tee fittings are manufactured at our state-of-the-art fabrication facilities. All our fittings are fabricated with stiffening beads on duct sizes 19” wide and larger which have more than 10 square feet of unbraced panel. Fittings shall be beaded unless the duct will have an insulation covering or an acoustical liner. This requirement is applicable to 20 gauge or less in thickness and 3” W.G. or less. Most all fittings are fabricated with Pittsburgh seams. Fittings are available completely assembled with all accessories (reinforcement, vane & rail, etc…) installed. Fittings are also available knocked down to reduce shipping and handling costs.
For additional product information about our bullhead tee ducts, contact us and one of our team members will get back to you promptly.