See charts below for sizes and gauges:
• Available in various gauges of G-60 galvanized steel
• Available in aluminum, stainless steel, polyvinyl coated, paint grip and G-90
• Available in 3” – 28” diameter
• Angles can come with one or both ends crimped
• All fittings are yellow label union made
All Spiral Pipe and Fittings Products
- 45 Degree Adjustable Angles
- 45 Degree Full Saddle
- 45 Degree Lateral Cross
- 45 Degree Lateral Cross with Reducer
- 45 Degree Standing Seam Angles
- 45 Degree Swedged Saddle
- 45 Degree Two-Piece Pressed Solid Welded Angles
- 45 Degree Welded Gored Angles
- 90 Degree Adjustable Elbows
- 90 Degree Conical Cross
- 90 Degree Conical Cross with Reducer
- 90 Degree Conical Swedge Saddle
- 90 Degree Conical Tee Duct Fittings
- 90 Degree Conical Tee with Reducer
- 90 Degree Cross
- 90 Degree Cross with Reducer
- 90 Degree Duct Tee
- 90 Degree Full Saddle
- 90 Degree Pressed Saddle Tap
- 90 Degree Pressed Saddle Tap with Damper
- 90 Degree Shoe Tap Saddle
- 90 Degree Standing Seam Elbows
- 90 Degree Swedged Saddle
- 90 Degree Tee with Reducer
- 90 Degree Two-Piece Pressed Solid Welded Elbows
- 90 Degree Welded Gored Elbows
- Access Doors (Rectangular)
- Access Doors (Round)
- Bullhead Tee (Bullnose)
- Companion Angle Rings – Pressed and Rolled for Spiral Pipe and Fittings
- Complete Seal Damper Sleeve
- Complete Seal Damper Sleeve with 2-inch Standoff
- Complete Seal Fittings
- Concentric Reducer
- Conical E-Z Tap with 2-inch Standoff Collar
- Connector (Coupling)
- Double Deflection Spiral Duct Diffuser
- Double Rod Hanger
- E-Z Flange Jr. with Barrel Clamp – 6-inch to 24-inch Diameter
- E-Z Tap Collar with 2-inch Standoff
- E-Z Tap Collars
- E-Z Tap Collars with 2-inch Standoff
- E-Z Tap Conical Takeoff Collar
- E-Z Tap Conical Takeoff Collar with Damper
- E-Z Tap Takeoff Collar with Damper
- Eccentric Reducer
- End Cap (Plug)
- Fixed Pattern Diffusers – 2 Cone Series
- Fixed Pattern Diffusers – 3 Cone Series
- Floor sweeps
- Full Blast Gate
- Heavy Duty Flexible Duct Ties
- Heavy Duty Flexible Duct Ties
- Heavy Duty Volume Dampers
- High Efficiency Steel Takeoffs
- High Efficiency with 2-inch Standoff
- KV12 Bracket Assembly
- Light Gauge Round Pipe Hangers
- Notched Collars
- Notched Collars with Damper
- Offset Fitting
- Pair of Pants (Wye Branch)
- Pressed Concentric Reducer
- R4.2 Insulated Flexible Duct
- Rectangular Duct Wrap
- Round Ceiling Diffuser with Butterfly Damper
- Round Dampers (Light Gauge)
- Round Ductcap
- Sheet Metal Screws (TEK Screws)
- Single Deflection Spiral Duct Diffuser
- Single Rod Hangers
- Skyblasts Exhaust Stack Caps
- Sleeve with 2” Standoff
- Spiral Duct Register Takeoffs
- Spiral Pipe & Fittings
- Spiral Pipe Connector (Non-Gasketed)
- Square to Round Duct Transition
- Super HETO High Efficiency Duct Takeoff
- Super HETO High-Efficiency Die Stamped Takeoff
- Super Heto with 2-inch Extension with E-Z Flange
- Super Heto with 2″ Standoff
- Tensioning Tool
- Wire Rope Hangers CL18
- Wire Rope Hangers CL23
see more products
45 Degree Adjustable Angles
Adjustable angles are versatile and are most commonly used in a standard spiral system.
Submittal PDF
Category: Spiral Pipe and Fittings
Related products
Spiral Pipe and Fittings
E-Z Flange Spiral Pipe System
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings