90 Degree Pressed Saddles with E-Z Flange from Sheet Metal Connectors, Inc. are manufactured from extra deep drawing steel (EDDS) in accordance with ASTM–A653. Stamped fittings are precision drawn, tolerances must be within + or – .002 thickness to assure a quality product at all times. All pressed fittings are made of 24 Ga. or 22 Ga. galvanized material with a G60 or better coating thickness and is chemically treated to retard white rust.
Submittal PDF90 Degree Pressed Saddles are manufactured with domestic steel and provide a uniform, airtight method of tapping into the main duct.
Dimensions to be listed as follows:
A on B
Contact us for a quote or for additional information about 90 Degree Pressed Saddles for your application.
E-Z Flange Spiral Pipe System
90 Degree Pressed Saddles with 2-Inch Stand Off with E-Z Flange
E-Z Flange Spiral Pipe System
90 Degree Pressed Saddles with Volume Damper with E-Z Flange
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
90° Pressed Saddles with 1-1/2-inch Stand Off with E-Z Flange
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
