Sheet Metal Connectors’ 45° Degree Lateral Tee with E-Z Flange are manufactured with an elbow lock seam, lap seam (i.e. stitch weld, riveted, tack weld or solid weld), standing seam or butt weld seam. These may be with or without duct sealant.
All 45° Degree Lateral Tees can be manufactured with:
• E-Z Flange Jr. with Barrel Clamp – 6″ to 24″ Diameter
• E-Z Flange with Barrel Clamp – 26″ to 96″ Diameter
45 Degree Lateral Tee
Dimensions to be listed
as follows:
A, B, C
L = (1.414 x C) + 9”
Contact us to learn more about our flanged 45-degree lateral tees.
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
90 Degree Two Piece Pressed Solid Welded Elbows with E-Z Flange
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
90 Degree Pressed Saddles with 2-Inch Stand Off with E-Z Flange
E-Z Flange Spiral Pipe System
90° Pressed Saddles with 1-1/2-inch Stand Off with E-Z Flange
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
